當前位置：天津金鐳科技有限公司>>>>正作用開關型溫度控制器

正作用開關型溫度控制器

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地天津市

在線詢價 收藏產品查看聯系電話

紡織服裝機械網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2022-09-27 10:15:57瀏覽次數：267次

聯系我時，請告知來自紡織服裝機械網

產品分類 品牌分類

暫無信息

天津金鐳科技有限公司

經營模式：其他

商鋪產品：39條

所在地區：天津天津市

詢價 給他留言

產品簡介

ACTION:Directsnap;PilotOutputPressure“snapson"withtemperaturerise

詳細介紹

ACTION:
Direct snap; Pilot Output Pressure “snaps on" with temperature rise.
APPLICATION:
Used to control temperature in indirect and direct heaters, emulsion treaters, reboilers, steam generators, heat exchangers, cooler shutter controls, and salt bath heaters.
WORKING PRESSURE (sensing element):
psig kg/cm2
500 35.15 max. without Separable Socket
4000 281.23 max. with Separable Socket
7000 492.15 max. with Special Separable Socket
Separable Socket is an extra price item and must be ordered separately, if desired. To order Separable Sockets refer to Table of Contents.
TEMPERATURE RANGE:
T 12S, T 18S -30°F minimum to 400°F maximum
-34°C minimum to 204°C maximum
HT 12S, HT 18S -30°F minimum to 750°F maximum
-34°C minimum to 399°C maximum

OPERATION:
These Thermostats each consist of an Indirect Acting Throttle Base Assembly which is connected to a 3 PS Pilot providing a Direct Snap Output Signal. The 3 PS Pilot also acts as an amplifier increasing the sensitivity of the Base Assembly.
Assume the set temperature of the Thermostat is above the temperature of the system being controlled. As the system temperature rises, the STAINLESS TUBE increases in length to move the Thermostat Diaphragm (or Bellows) Assembly in a direction to first close the seat at BALL 1 (Violet to Orange) and open the seat at BALL 2 (Orange to Atmosphere). As Variable Pressure (Orange) decreases, the 3 PS Pilot Diaphragm Assembly moves upward to close the seat at BALL 4 (Yellow to Atmosphere) and open the seat at BALL 3 (Violet to Yellow). Increasing Pilot Output Pressure (Yellow) helps move the 3 PS Pilot Diaphragm Assembly upward and thereby produces a “snap on" pilot action. Output Pressure (Yellow) is sent to cause the desired Pilot or Motor Valve action.
As the system temperature decreases, Variable Pressure (Orange) increases, the Pilot Diaphragm Assembly is forced downward to close the seat at Ball 3 (Violet to Yellow) and open the seat at BALL 4 (Yellow to Atmosphere). Venting of Pilot Output Pressure (Yellow) permits the Pilot Diaphragm Assembly to move downward more rapidly, producing a “snap off" pilot action. Output Pressure (Yellow) is vented causing the desired Pilot or Motor Valve action.
The 112 SMT is the recommended Motor Valve for this thermostat configuration. Refer to “Burner Valves" in the Table of Contents for more information.
SUPPLY PRESSURE:
5 to 30 psig
.35 to 2.11 kg/cm2
RESPONSE RANGE：
T 12S - 4.5°F, 2.5°C
T 18S - 3°F, 1.7°C
HT 12S - 3°F, 1.7°C
HT 18S - 2°F, 1.1°C